Since 1974, Captive Fastener Corporation has been solely dedicated to manufacturing the finest quality self-clinching fasteners for a variety of industrial and electronics equipment produced by major OEMs.
All Captive self-clinching fasteners conform to industry standards, which enables them to be fed through all standard automatic insertion equipment, and provide a substitute for form, fit and function.
|
Series
|
Cross. Ref*
|
Material
|
Finish
|
|
CHTS
|
FH4
|
400 Series Stainless Steel
|
Passivated
ASTM A380 |
Captive Series CHTS Studs provide a strong, flush-head assembly in stainless steel sheet material as thin as .040 in. (1.0 mm). The heat-treated 400 Series stainless steel studs may be installed with a standard shop press and provide high torque-out and pushout performance in materials with a Rockwell Hardness of B-92 or less.
Self-clinching nuts provide a strong female thread in panels that are too thin to be conventionally tapped. They are installed by placing them in properly pre-cut holes in sheets and applying enough force for metal to cold flow into an undercut.
Self-Clinching Nuts
Types of Self-Clinching Nuts Available at TCH:
Self-clinching studs are installed by placing them in properly pre-cut holes in sheets and applying enough force for metal to cold flow into an undercut.
This allows the nut to be integrated into the sheet with a strong bond, but installs flush on the underside of the panel. The serrated ring prevents the nut from rotating and have excellent torque and push out characteristics.
Types of Captive Studs Available at TCH :
|
Standoffs are used in applications that require mounting, spacing or stacking panels, boards or components. These standoffs are pressed into pre-cut round holes and pressed with parallel squeezing force.They can mount permanently to sheets as thin as 0.025"/0.63mm.
Types of Standoffs Available at TCH :
|
Pins and Other
Self-clinching pins are ideal for compact electronic assemblies. These pins are easily installed by squeezing them into a properly sized hole in a sheet. With applied force, the metal will cold flow and clinch them permanently into place. They can be installed into a variety of hardness (HRB 92/ HB195).
Types of Pins and Other Fasteners Available at TCH :
|
Pins
|
Other
|
