CFFS & CFFC floating clinch nuts provide a self-clinching fastener with a floating nut that compensates for mating misalignments to .030inches (.8mm) and provides prevailing torque for the mating screw equivalent to MIL-N-25027 specifications.

CFSP self-clinching nuts provide strong load-bearing threads in stainless sheet metal as thin as .030inches (.8mm).

CFB & CFBS blind, sealed-thread, press nuts are designed to provide extended thread lengths in thin sheet metal. Press nuts provide a seal against the entrance of dirt, oils, moisture, and corrosive atmospheres. They are usually more economical to use than nut and screw-type hardware that require elaborate seals and special assembly procedures.

C & CS nuts provide strong load-bearing threads in sheet metal and other thin section assemblies. C & CS nuts meet spec. features of MIL-N-45938/1.

CFH nut fasteners are available in both heat-treated and nonheat-treated versions, offering an opportunity to up-grade fastening quality with appreciable cost reduction over weld nuts.

CKN & CKNS self-clinching KAL-nuts provide strong internal threads in sheet material as thin as 1 mm. They are available in both heat-treated carbon steel and stainless steel material.

CFL flush nuts offer the advantage of being completely flush within the sheet while providing load-bearing threads in materials too ductile to tap. All dimensions are identical to industry standards.

CFE self-clinching fasteners are designed to provide strong threads in a minimum of space. They are available with locking and non-locking threads and are directly interchangeable with industry standards.

CRT series fasteners provide a low-installed-cost solution where a clinching fastener with repeat locking torque is required. The design allows for greater reusability and minimizes the possibility of thread damage of the mating screw.

CPL top collar lock nuts combine reliable self-clinching mounting with a reusable non-metallic thread locking element.