- Strip insulation from the wire, crimp the contact onto the wire
- Assemble the contact carrier, start with the centre contact
- Snap the assembled contact carrier into the connector housing
- Snap the connector housing into the socket housing
- Fix the adhesive seal to the socket housing
- Press the locking hook on connector housing and pull the connector housing out of socket housing
Home / Blogs / Electronic Components / How to: CONEC M12x1 Sockets field attachable for front and back panel mounting (4-, 5- and 8- position)
How to: CONEC M12x1 Sockets field attachable for front and back panel mounting (4-, 5- and 8- position)
- July 29, 2015
- 1 min read
Tag:
4-position
5-position
8-position
back panel mounting
Conec
connectors
Drive technology
front panel mouting
Housing and device connection
hydraulic motors
M12X1 Sockets
Rotary encoder manufacturers
Related Blog Posts
EYE BOX is the new frontier for ITALTRONIC, joining the industrial world of HOME & BUILDING AUTOMATION applications with the design value of something technological, increasing the customization level to make it exclusive.
- January 24, 2023
- 2 min read
EI Sensor Technologies is a leading manufacturer of temperature sensors, and supports there application within the HVAC industry. EI Sensors manufactures top quality PTC and NTC Thermistors, RTDs (Resistance Temperature Detectors), Thermistor Probe Assemblies and RTD Probe Assemblies. These products play an integral part in the HVAC industry.
- August 18, 2022
- 2 min read